Triple Chamber Oil Expeller

Azad Triple Chamber Oil Expeller is a very high capacity oil expeller which we serve our clients in the market. The seed automatically passes from the 1st Chamber into the 2nd chamber and then to the 3rd one. The internal diameter of all the three chambers is different. This results in the better compression and also high yield is recovered. Azad Triple Chamber Oil Expeller goes through various quality checks to make sure that the industrial standards are effectively and efficiently met.

AZAD Triple Chamber High Pressure Oil Expellers are manufactured with experience of more than six and a half decades. AZAD Oil Expellers are known for Robust Construction, Simple design, lower Power Consumption for efficient service and better oil yield with normal wear tear to meet the modern trend of High Production requirements of Oil Mills. Whatever the oil seed Groundnut, Castor, Neem, Cotton, Maize germ, Sunflower, Safflower, Mohwa, Niger, Sesame/Tilli, Copra, Mustard, Linseed, Rapeseed etc.

AZAD EXPELLERS crushes them all.

Type: Oil extraction in AZAD Triple chamber oil expeller by high pressure system to extract more oil leaving 6-8% oil approx. in the cake, producing fine color in the oil and high protein contents in the cake.

Body: Main body and Cone body are of good quality heavy duty Cast Iron. Centre body of fabricated thick steel plates fitted on the steel base plate. Triple reduction oil immersed gear box and machined accurately by horizontal boring machine for perfect centre of gear shafts and alignment of bodies for smooth, noiseless and even pressure running of gears.

Bed : The Bed is fabricated from heavy duty channels and plates, fully welded and properly machines to ensure perfect stability, alignment and facilitating erection on proper foundation.

Gears: Helical hobbing machine cut heavy duty, tested steel gears, duly case hardened to ensure longer life. With both the ends of gear shaft mounted on heavy duty ball bearings to give a very smooth and silent running. The gears are lubricated with high viscosity and high temperature resisting grease and need no further lubrication as they are totally enclosed in a dust proof and oil tight drive housing, fitted with oil level indicator.

Chamber: Open type cage of heavy steel plates fitted with case hardened cage bars and clamped with heavy duty clamping bars.

Worms: The feeding and discharge worms are made of tested high quality steel and are given superb case hardening for best performance and long life.

Shafts: Main worm shaft and both the driving shafts (intermediated & side) are made of tested high tensile steel bars and machined accurately and given superb finish. Clockwise standard rotation facing the pulley.

Bearings: Ball, Roller and heavy duty Thrust bearings are fitted in the machine to ensure light and smooth operation.

Feeding System: The feeding system of the seeds is by agitator which rotates in the long/round steam kettle of deep groove type, which preheats and cooks the seeds. This is connected with the hopper to the inlet of the chamber for giving better oil yield.

Discharge system: The machine is fitted with extra heavy duty manual adjustable discharge orifice made of tested steel duly case carburized for good quality of oil cake.

Steam: All the oil expellers are fitted with a 2.5 meter long deep groove type steam heating kettle for precooking of the oil seeds to give better oil yield and maximum extraction of oil in single operation by high pressure system. The steam required for a long steam heating kettle at a pressure 2 kg/Cm.sq. to 3.5 kg/Cm.sq. (30 to 50 Lb/lnch.sq.).

Long/round cooking kettles are made by seamed wielding of tested steel plates and are hydraulically tested upto 100 LBS before supply.

Optional : Round steam cooking kettle with vertical feed device, foundation bolts, motor & electrical fittings etc.

Technical Specifications